http://liftcontrolsystem.com/upload/3576/logo/logo.jpg http://liftcontrolsystem.com http://liftcontrolsystem.com STEP Electric is China elevator control system product manufacturer, offer servo drive, elevator inverter, elevator integrated drive and controller, vector inverter, elevator main controller board. Our servo drive system was named a Shanghai Independent Innovative Product. We have national level Postdoctoral Research Station. Our products are extensively used in plastic and rubber processing, packaging, construction industries. http://liftcontrolsystem.com/add/rss ETW INTERNATIONAL service@etwinternational.com service@etwinternational.com http://liftcontrolsystem.com/ STEP Electric is China elevator control system product manufacturer, offer servo drive, elevator inverter, elevator integrated drive and controller, vector inverter, elevator main controller board. Our servo drive system was named a Shanghai Independent Innovative Product. We have national level Postdoctoral Research Station. Our products are extensively used in plastic and rubber processing, packaging, construction industries. 2018-04-27T17:39:54+08:00 http://liftcontrolsystem.com/products.html STEP Electric is China inverter manufacturer, our water pump inverter is flexible and convenient to use, and provides water supply system with multiple functions, like constant pressure water supply, and water pump switch functions, etc. Our elevator controller and escalator controller are extensively used to control the elevators and escalators in shopping malls, supermarkets, hotels, official buildings, residential buildings, and more. 2018-04-27T17:39:56+08:00 http://liftcontrolsystem.com/10-frequency-inverter-ac-drive.html STEP Electric is China frequency inverter manufacturer, the frequency inverter is designed to control an AC motor by controlling the motor's power frequency. It provides water pump, elevator and other machinery with variety of protection functions, such as overcurrent protection, overvoltage protection and overload protection, etc. 2018-04-27T17:39:57+08:00 http://liftcontrolsystem.com/10-1-energy-regenerator.html 1. Our energy regenerator adopts high speed DSP chips to monitor the power grid voltage. Thus this product is of high efficiency and has small feedback impact on the power grid. It is a product conforming to the national and industrial standards. 2. Phase amplitude control algorithm and PWM technology are employed in this energy regeneration device. 3. IGBT high-speed switch components ensure less switch loss and high operation efficiency. 4. The current fed back to the power grid comes with sine waveform and the current total harmonic distortion is less than 5%. 2018-04-27T17:39:57+08:00 http://liftcontrolsystem.com/10-4-elevator-inverter.html AS320 elevator inverter is a kind of newly developed frequency inverter especially for elevators. It is designed with 32-bit MPU for motor driving, high performance complex programmable logic device (CPLD), and advanced power module. Meanwhile, the elevator inverter is designed based on international advanced closed loop vector control technology and supports various control modes including V/F control, sensorless vector control, and torque control modes. Integrating the characteristics of potential energy load, the elevator inverter allows elevators to operate efficiently, smoothly and steadily, and offers passengers a comfortable feeling. 2018-04-27T17:39:58+08:00 http://liftcontrolsystem.com/10-5-escalator-integrated-drive-and-controller.html As its name indicates, AS330 escalator integrated drive and controller is a combination of an escalator drive and an escalator controller. It comes with anti-interference capability and design exceeding the highest industrial design standard, and features compact structure, small size, few wire connection, and high reliability. It is also easy for operation and economical. With functions of both escalator controller and escalator drive, the escalator integrated drive and controller provides escalators very high safety standard, and meanwhile, it can also offers multiple escalator operation control functions to suit customers' demands. 2018-04-27T17:39:59+08:00 http://liftcontrolsystem.com/10-6-elevator-integrated-drive-and-controller.html While designing the AS380 elevator integrated drive and controller, a variety of factors, including elevators' safety and reliability, inherent characteristics of elevator operation, and potential energy load characteristic of elevators, are taken into consideration. Designed based on variable frequency speed regulation technology and elevator control technology, the elevator integrated drive and controller is an ideal combination of an elevator drive and an elevator controller. Its dual 32-bit embedded microprocessor unit allows it to complete both elevator operation and motor drive functions. The multiple elevator operation functions can satisfy customers' different application requirements. 2018-04-27T17:39:59+08:00 http://liftcontrolsystem.com/10-7-general-vector-inverter.html AS500 general vector inverter is a newly developed frequency inverter designed to satisfy market demands. It is designed based on international advanced speed sensorless vector control technology, closed loop vector control and torque control technology. The vector inverter offers not only superior control performance as high end frequency inverters, but also improved reliability and environmental adaptability, as it is designed and manufactured to satisfy customers' varied application requirements and various industrial demands. 2018-04-27T17:39:59+08:00 http://liftcontrolsystem.com/10-13-integrated-elevator-control-cabinet.html a. This integrated elevator control case is designed with dual cooling systems and wide input voltage range. It also comes with high-precision current detection and protection device as well as comprehensive power supply protection device. In addition, this integrated elevator control cabinet is resistant to moisture and dust. b. Main cable is used to connect the main board and the drive to reduce errors. c. Our company has alaboratory approved by the CNAS and UL witness lab to ensure product quality. d. The components we use in our integrated elevator control box are from reliable component suppliers. 2018-04-27T17:40:00+08:00 http://liftcontrolsystem.com/11-elevator-controller-escalator-controller.html STEP Electric is China elevator controller manufacturer, elevator controller or escalator controller mainly consists of elevator main controller board, car controller board, car command board, and indicator board calling board, group control system, and elevator control cabinet, etc. Our elevator controller and escalator controller are extensively used to control the elevators and escalators in shopping malls, supermarkets, hotels, official buildings, residential buildings, and more. 2018-04-27T17:40:01+08:00 http://liftcontrolsystem.com/11-1-elevator-main-controller-board.html Our elevator main controller board is designed with a high performance 32-bit ARM processor, and offers accurate speed signal, good security monitoring performance, and high anti-interference capability, etc. Also, it comes with strong anti-electromagnetic interference and anti-static capabilities. Our elevator main controller board is commonly used for the control of commercial elevators, home elevator, and hydraulic elevators for villas, to name a few. As an experienced elevator main controller board manufacturer and supplier in China, at STEP we also offer car controller board, full serial VVVF control cabinet, fan inverter, water pump inverter, and more. 2018-04-27T17:40:01+08:00 http://liftcontrolsystem.com/11-1-1-32-bit-standard-serial-main-controller-board.html The main controller board is equipped with a 32-bit industrial ARM processor, and comes with dual-CPU to ensure improved system safety. It offers strong anti-interference and anti-static capabilities and passed the test for contact discharge up to 8000V. The 32-bit standard serial main controller board is manufactured according to EN81 and GB7588 safety rules, and is ideal for control of elevators in commercial buildings and residential buildings up to 64 floors. It helps ensure smooth, steady, accurate and comfortable elevator running. The maximum elevator speed is up to 4m/s. 2018-04-27T17:40:07+08:00 http://liftcontrolsystem.com/11-1-2-32-bit-elevator-controller-board.html 1. CAN Bus serial communication method is applied to our commercial elevator main controller board. 2. Analog speed presetting and multi speed presetting modes are available to our 32-bit elevator controller board. 3. This elevator controller panel is compatible with differential, open-collector and push-pull encoders. 4. Our product comes with duplex control and group control function, load weighing compensation function, elevator IC card management function, district monitoring function and remote monitoring function. 5. Our elevator control circuit board supports tri-car door opening and can be operated through the STEP standard hand-held operator. 6. The LCD display is able to show the status and parameter of the system as well as the real-time speed curve of the elevator. 2018-04-27T17:40:08+08:00 http://liftcontrolsystem.com/11-1-3-32-bit-high-performance-serial-main-controller-board.html The 32-bit high performance serial main controller board is manufactured in accordance with EN81 and GB7588 safety standards, and is ideal for control of commercial elevator and residential elevators. It allows elevators to operate at a maximally speed of 6.3m/s among 64 floors. With a LCD operation panel, the 32-bit serial main controller board can show the system status and parameters and offer real-time display of elevator operation curve. In addition, it can be used to control elevators with three doors, and supports control of elevators driven by either asynchronous motor or synchronous motor. 2018-04-27T17:40:08+08:00 http://liftcontrolsystem.com/11-1-4-16-bit-serial-main-controller-board.html The 16-bit serial main controller board is designed with a high performance industrial CPU and has strong antistatic and anti-electromagnetic interference capabilities. It conforms to EN81 and GB7588 safety rules. It allows residential elevators to operate at a maximum speed of 1.75m/s to maximally 32 floors, and the elevator traction machine can be driven by either synchronous motors or synchronous motors. The serial main controller board supports duplex control of two elevators. 2018-04-27T17:40:08+08:00 http://liftcontrolsystem.com/11-1-5-16-bit-parallel-main-controller-board.html The 16-bit parallel main controller board conforms to EN81 and GB7588 safety standards, and ideal for cargo lifts. It is designed with high performance industrial CPU and is characterized by strong anti-electromagnetic interference and anti-static capabilities. Terminals using pressure spring connection method make the wire connection of the parallel main controller board simple and easy. 2018-04-27T17:40:08+08:00 http://liftcontrolsystem.com/11-1-6-home-hydraulic-lift-controller-board.html The home hydraulic lift controller board is manufactured according to related safety rules in North America area, and is CSA marked. It features small size and convenient installation, high antistatic and anti-electromagnetic interference capabilities. Meanwhile, it is designed with additional CAN ports to ensure its superior expansion capability and a high performance CPU. 2018-04-27T17:40:09+08:00 http://liftcontrolsystem.com/11-1-7-home-lift-controller-board.html 1. As its name suggests, this home lift controller board is specifically designed to be used in home lift. It is applicable for lift with maximum 5 stops and rated speed not exceeding 0.5m/s. 2. Our control circuit panel for home lift adopts hydraulic drive and supports parallel signal input. 3. This product is equipped with an operator on board and the operator is used for examining and adjusting the system status. In addition, our STEP standard hand-held operator is also suitable for this home lift controller panel. 4. Our home lift controller board is able to save 20 pieces of lift fault records. 2018-04-27T17:40:09+08:00 http://liftcontrolsystem.com/11-2-car-controller-board.html The car controller board has various signal outputs which enable it to offer various functions, including car arrival gong, car lighting control, car nudging, overload indicator, and buzzer alarming functions. Meanwhile, it comes with a voice announcer to remind passengers the arrivals. It supports at most 8 SM-03 car command boards to allow elevators to go up to maximally 64 floors. In addition, the car controller board has connection ports for door opening and closing buttons, and is designed with light curtain safety protection function and a safety touch panel switch. 2018-04-27T17:40:01+08:00 http://liftcontrolsystem.com/11-3-car-command-board.html 1. This car command board shall be used together with car control board of SM-02 series. 2. One piece of SM-03-D series is suitable for the building with maximum 8 floors. 3. One piece of SM-03-E series is applicable for the building with maximum 16 floors. STEP is a China-based car command board manufacturer and supplier. Our company also provides integrated full serial VVVF control cabinet, serial calling board, elevator integrated drive and controller, elevator inverter, and much more. 2018-04-27T17:40:02+08:00 http://liftcontrolsystem.com/11-4-indicator-board-calling-board.html Our company provides a variety of indicator board which mainly classified into serial indicator board and parallel indicator board. The available colors of the serial indicator boards are red, orange, blue, etc. The indicator board has a scrolling display function, which will show the current floor and direction, as well as the elevator status such as overload, full load, inspection mode, etc. 2018-04-27T17:40:02+08:00 http://liftcontrolsystem.com/11-4-1-dot-matrix-lcd-elevator-calling.html 1. Our dot-matrix LCD elevator calling & indicator board adopts a 16-bit high performance industrial grade CPU. 2. It is equipped with a 320×240 dot matrix display which is able to display rich contents clearly and softly. The display area is in the size of 115mm×86mm and users can define the welcome messages displayed on the board freely. 3. Three kinds of display color patterns are available to this elevator indicator panel. They are respectively white words in blue background, white words in black background and yellow words in black background. 2018-04-27T17:40:09+08:00 http://liftcontrolsystem.com/11-4-2-tft-lcd-elevator-indicator-board.html 3.5 Inch TFT LCD Elevator Indicator Board Product Characteristic Display Zone: 72mm×54mm Resolution: 320×240 Display Type: Horizontal Communication Type: CAN Bus serial communication Rated Voltage: 24V/DC Picture Updating Method: This indicating board will be connected to a PC through a USB port cable to update pictures. 2018-04-27T17:40:10+08:00 http://liftcontrolsystem.com/11-4-3-serial-led-elevator-calling.html 1. Our serial LED elevator calling & indicator board is equipped with a16-bit high performance industrial CPU. 2. CAN Bus serial communication method helps save cables and make wiring work easier. 3. Our serial indicator board adopts 7-segment or 16-segment LED display and the display color can be red, orange or blue. 2018-04-27T17:40:10+08:00 http://liftcontrolsystem.com/11-4-4-serial-calling-board.html The serial calling board can generate and receive call signals controlled by a 16 bit high performance industrial CPU. After the elevator stops, the serial calling board will drive the indicator lamp and the chime. For an elevator equipped with our serial calling board, passengers can set the floor number by a rotary switch. Our serial calling board uses the cable saving and easy wiring CAN-Bus serial communication and has four relay outputs and elevator locking function. 2018-04-27T17:40:10+08:00 http://liftcontrolsystem.com/11-4-5-serial-lcd-elevator-calling.html 1.Using a 16-bit high performance industrial grade CPU, our serial LCD elevator calling & indicator board is able to display rich contents clearly and softly. 2. Employing the CAN Bus serial communication method, our serial elevator indicator plate saves cables and enjoys easy wiring work. 3. Size of the display area for the SM-04-VL B3 model calling board is 124 mm×65 mm, while display area size for the SM.04VL16/A model one is 115 mm×49 mm. 4. Contents will be displayed in white under blue background on the indicating board. 2018-04-27T17:40:11+08:00 http://liftcontrolsystem.com/11-4-6-serial-dot-matrix-led-elevator-calling.html 1. 16-bit high performance industrial grade CPU is configured to our serial dot-matrix LED elevator calling & indicator board. 2. This product supports square dot matrix or round dot matrix display in the color of red, orange or blue. 3. Applying the CAN Bus serial communication method, our dot-matrix elevator indicating plate uses less cables and enjoys easy wiring design. 2018-04-27T17:40:11+08:00 http://liftcontrolsystem.com/11-4-7-serial-super-large-screen-dot-matrix-indicator-board.html Our serial super large screen dot matrix indicator board is controlled by a 16 bit high performance industrial CPU. For an economic and convenient wiring connection design, our serial dot matrix indicator board applies the CAN-Bus serial communication standard. The extra large screen with round LED dot matrix can display the information such as the current floor and elevator running direction, as well as a Chinese/English welcome message which can be set or modified by the customer easily. Three available display colors, red, orange and blue, can be chosen according to one's preference. 2018-04-27T17:40:11+08:00 http://liftcontrolsystem.com/2-4-7-lcd-indicator-board.html With a 16 bit high performance industrial CPU and a CAN-Bus communication standard wiring design, the serial high resolution LCD indicator board achieves multiple functions including elevator call and elevator locking. After receiving the call signal, the serial high resolution LCD indicator board will light the button of the corresponding floor. 2018-04-27T17:40:11+08:00 http://liftcontrolsystem.com/11-4-9-parallel-indicator-board.html 1. The parallel indicator board is installed with high performance industrial CPU. 2. The elevator controller supports parallel communication. 3. Display method of the elevator indicator board: Dot matrix or 7-segment LED 4. Display color: red, orange, or blue 2018-04-27T17:40:12+08:00 http://liftcontrolsystem.com/11-5-elevator-group-control-system.html Our company provides a variety of indicator board which mainly classified into serial indicator board and parallel indicator board. The available colors of the serial indicator boards are red, orange, blue, etc. The indicator board has a scrolling display function, which will show the current floor and direction, as well as the elevator status such as overload, full load, inspection mode, etc. 2018-04-27T17:40:02+08:00 http://liftcontrolsystem.com/11-5-1-standard-elevator-group-control-system.html The elevator group control system is designed based on centralized group control technology. A group controller is used to realize the registration and the allocation of the hall call. CAN-Bus serial communication between the group controller and the elevator's main controller ensures high speed and reliable transmission of massive data. A group controller board mounted with LED indicators, allows us to monitor the communication effectiveness between the group controller and the elevator's main controller, as well as the connection of the input ports. The elevator group control system can manage a maximum of 8 elevators and 48 landings, allowing a wide range of applications. 2018-04-27T17:40:12+08:00 http://liftcontrolsystem.com/11-5-2-elevator-destination-dispatch-system.html a. The up peak mode can be set according to time. You can set each day's initial time and end time for up peak mode within a week. b. The up peak mode is also able to be triggered by a switch. The elevator will enter up peak mode after the up peak service switch is on under any condition. c. Up peak mode will be intelligently identified when all elevators in a group are running and quantity of registered floor call departing from the lobby exceeds the preset value. 2018-04-27T17:40:12+08:00 http://liftcontrolsystem.com/11-6-remote-elevator-monitoring-system.html This elevator supervising and controlling system supports multi-level authorized management modes set by intelligent computer software. This allows the operator to control and adjust the elevator in the monitoring room. Since this system is designed with real-time fault alarm and intelligent fault information reporting function, the operator will know the fault and its reasons at once when there is something wrong with the elevator. With strong monitoring capacity, this system is able to manage 100 sets of individual elevators at the same time. 2018-04-27T17:40:02+08:00 http://liftcontrolsystem.com/11-7-elevator-control-cabinet.html The elevator control cabinet is the device to control the operation of the elevator. It is usually installed in the control room. Our elevator control cabinet supports simplex control, duplex control, group control, and remote monitoring functions, etc. The electric motor drive of some type of the elevator control cabinet adopts VVVF(Variable Voltage Variable Frequency) system. The elevator speed can be adjusted continuously. The color of the elevator control cabinet can be chosen with one's preference, with available color of dark grey, blue, light grey or customer-made. 2018-04-27T17:40:03+08:00 http://liftcontrolsystem.com/11-7-1-full-serial-dcvv-control-cabinet.html The electric drive uses a MENTOR II DCVV speed regulator produced by British CT, and there is no need for electric generator set. By changing the voltage on the brush of the motor, the motor speed can be modulated. Hence, an elevator controlled by the DCVV control cabinet offers a comfortable feeling, improved operation efficiency and reduced energy consumption. The full serial DCVV control cabinet uses an absorption circuit and a DC reactor to greatly reduce the operation noise. Our control cabinet is suitable for different kinds of DC elevators. 2018-04-27T17:40:13+08:00 http://liftcontrolsystem.com/11-7-2-parallel-hydraulic-elevator-control-cabinet.html Power requirement: 3 phase, AC380V-460V, 50/60Hz Power range: 5KW-75kW Maximum elevator speed: 1.0m/s Number of floors: 5 Hydro-cylinder applicable: MCP-PYGM, GMV; MCP-PYBL, Belling Main controller: SM-01-DPC Drive mode: Star Delta Starter Landing accuracy: ±5mm Performance standard: GB7588/EN-81 Safety standard: JG5071-1996 Room temperature: -10℃-45 ℃ Color: light grey (optional) Display mode: Seven segment code, BCD code, Gray code, Binary code Dimension (mm): 1300×750×280 2018-04-27T17:40:13+08:00 http://liftcontrolsystem.com/11-7-3-integrated-full-serial-vvvf-control-cabinet.html Switches in Machine Room: Governor, upward overspeed protection (which for asynchronous motor), manual wheel, motor side EM-stop and emergency power running switches Switches in Shaft: Terminal limit switch, buffer switch, rope brake switch, pit EM-stop switch and deceleration switch (except limit switch) Switches on Car Top: Car EM-stop switch, car top EM-stop switch, safety gear, landing sensor, over-load, light-load, full-load switch (car bottom without power supply type). 2018-04-27T17:40:13+08:00 http://liftcontrolsystem.com/11-7-4-roomless-integrated-full-serial-vvvf-control-cabinet.html 1. Equipped with the fully upgraded iAstar AS380 drive controller and adopting CAN Bus serial communication method, our roomless control cabinet is easier to adjust. 2. This elevator control system is able to achieve humanized functions such as duplex control, group control, remote monitoring and emergency rescue, making elevator operation safer. 3. Thanks to the new system configuration with car top board and car function board, core quantity of the cable is greatly reduced. 4. Higher stability and better elevator travel feeling are achieved due to the excellent VVVF drive system. 2018-04-27T17:40:14+08:00 http://liftcontrolsystem.com/11-7-5-full-serial-vvvf-control-cabinet.html 1. Assembled with a full serial control system, our VVVF control cabinet is able to fulfill multiple humanized functions such as duplex control, group control, remote monitoring, emergency rescue, etc. 2. The excellent VVVF drive system assembled in our full serial VVVF operating box ensures higher stability of the elevator and offers a better elevator travelling experience to passengers. 3. CAN bus serial communication method greatly reduces the quantity of cable cores and saves the cost spent on wiring. 2018-04-27T17:40:14+08:00 http://liftcontrolsystem.com/11-7-6-roomless-full-serial-vvvf-control-cabinet.html 1. Our roomless full serial VVVF control cabinet is configured with a drive adopting VVVF (Variable Voltage Variable Frequency) technology. This allows the speed of the elevator to be adjusted continuously so as to guarantee comfortable travelling experience to passengers. 2. With a self-developed serial control system, our elevator control box supports duplex control, group control, remote monitoring and other functions. The application of CAN Bus serial communication technology not only greatly reduces the cable core quantity and the cost of wiring, but also makes the elevator run more stably and safely. Therefore, this is energy-efficient full serial elevator operation equipment which is worth selecting. 2018-04-27T17:40:14+08:00 http://liftcontrolsystem.com/11-7-7-parallel-vvvf-control-cabinet.html Switches in Machine Room: Governor, upward overspeed protection (which for asynchronous motor), manual wheel, motor side EM-stop and emergency power running switches Switches in Shaft: Terminal limit switch, buffer switch, rope brake switch, pit EM-stop switch and deceleration switch (except limit switch) Switches on Car Top: Car EM-stop switch, car top EM-stop switch, safety gear, landing sensor, over-load, light-load, full-load switch (car bottom without power supply type), light curtain switch, safety edge switch and arrival gong switch (electronic type) 2018-04-27T17:40:14+08:00 http://liftcontrolsystem.com/11-7-8-integrated-home-lift-control-cabinet.html 1. Equipped with the fully upgraded iAstar AS380 drive controller and adopting CAN Bus serial communication method, our roomless control cabinet is easier to adjust. 2. This elevator control system is able to achieve humanized functions such as duplex control, group control, remote monitoring and emergency rescue, making elevator operation safer. 3. Thanks to the new system configuration with car top board and car function board, core quantity of the cable is greatly reduced. 4. Higher stability and better elevator travel feeling are achieved due to the excellent VVVF drive system. 2018-04-27T17:40:15+08:00 http://liftcontrolsystem.com/11-8-escalator-control-system-escalator-control-cabinet.html Our escalator control system or escalator control cabinet is extensively used in new escalator installation and manufacturing, and old escalator upgrading fields. With variety of escalator control function, our escalator control system allows escalators to operate in variety of modes and offers variety of protection functions. Our VVVF and contactor drive escalator control cabinets include escalator control system, and are manufactured according to GB16899 safety standards. 2018-04-27T17:40:03+08:00 http://liftcontrolsystem.com/11-8-1-escalator-control-system-functions.html Our escalator control system is based on a high performance 16-bits industrial controller, and has great anti-electromagnetic interference and anti static capabilities. The escalator control system has a LCD control board, which can be used to set parameters for the system and show trouble codes. It is compatible with the STEP standard handle escalator controller. In addition, the escalator control system can be optionally equipped with failure monitoring system to improve the system safety. 2018-04-27T17:40:15+08:00 http://liftcontrolsystem.com/11-8-2-vvvf-escalator-control-cabinet.html 1. Equipped with self-developed ES.01 escalator controller and iAstar AS500 general inverter, the VVVF escalator control cabinet we offer allows the elevators to start smoothly and able to work under an energy saving mode. 2. Idle speed adjustment of the escalators can be achieved through this escalator control system. 3. Our escalator control box makes escalator operation easier since it is capable of achieving humanized functions such as error report, remote monitoring, I/O extension etc. It can also be operated through a handheld operator. 4. Designed with various kinds of protection functions, this VVVF escalator manipulating cabinet ensures safe and reliable escalator running. 2018-04-27T17:40:15+08:00 http://liftcontrolsystem.com/11-8-3-contactor-drive-escalator-control-cabinet.html 1. This contactor drive escalator control cabinet we produce is configured with STEP new generation ES.01 escalator controller which adopts star-delta starting mode. This advanced controller makes idle speed adjusting possible and allows the escalator to run under an energy saving mode. 2. Our contactor drive escalator control case offers multiple protection functions to guarantee the escalator runs more safely. In addition, this escalator manipulating device also supports various humanized functions including error report, handheld operator controlling, remote monitoring, I/O extension etc, making escalator operation more convenient. 2018-04-27T17:40:16+08:00 http://liftcontrolsystem.com/11-8-4-integrated-vvvf-escalator-control-cabinet.html 1. Our MCP-ESHC 500 integrated VVVF escalator control cabinet adopts iAstar AS330 integrated escalator drive controller. This roomless control box is able to achieve smooth start and idle speed adjustment of the escalator. 2. The bypass VVVF inverter is optional to be configured to this integrated control case to make the escalator switches from one operation mode to another more stably. At the same time, such configuration helps save energy to the largest degree. 3. Our escalator manipulating cabinet offers various protection functions as well as many other useful functions such as error display, remote monitoring, I/O extension, handheld operator controlling, etc. These functions guarantee the escalators run safely and stably. 2018-04-27T17:40:16+08:00 http://liftcontrolsystem.com/12-elevator-parts.html STEP Electric is China elevator part manufacturer, we can offer different types of elevator parts, including elevator button, elevator COP and elevator LOP. Commonly seen elevator part also includes elevator cable, indicator light, emergency light, and so on. Our elevator button is available in variety of models, including EB218, EB418A, EB420, EB960, to name a few. 2018-04-27T17:40:03+08:00 http://liftcontrolsystem.com/12-1-elevator-button.html Our elevator button is available in variety of models, including EB218, EB418A, EB420, EB960, to name a few. Each model of elevator button is classified into different types that are landing call button, up and down direction button, open and close door button, alarm button and intercom button, etc. In order to suit customers varied demands, we manufacture our elevator buttons with selectable lighting colors, including ruby red, fashion orange, bright yellow, jade green, ocean blue, and ivory white. Following are detailed information on each model of elevator button. 2018-04-27T17:40:04+08:00 http://liftcontrolsystem.com/12-2-elevator-cop-elevator-lop.html Our elevator car operating panel and elevator landing operation panel are divided into variety of models. All models of elevator COP and elevator LOP support signal input through seven segment code, BCD code, and serial communication methods. With the elevator COP and elevator LOP, the elevator status, such as Overload, Fire Control, Full Load, Stop, and In Inspection, can be displayed in the car and the hall. The elevator landing operation panel is compatible with both simplex and duplex connection methods. 2018-04-27T17:40:04+08:00 http://liftcontrolsystem.com/13-elevator-cable.html STEP Electric can provide Fixed Wiring and Non-sheathed Cable, PVC Insulated Soft Cable with 5 Cores or below 5, Flexible Elevator Cable . 2018-04-27T17:40:04+08:00 http://liftcontrolsystem.com/13-1-fixed-wiring-and-non-sheathed-cable.html 300/300V: 1.5KV (AC)/5min, no breakdown; 300/500V: 2.0KV (AC)/5min, no breakdown; 450/750V: 2.5KV(AC)/5min,no breakdown 3C Certificate No.: 2003010105082949, 2004010105119784, 200401010519789 Lead Free Environmental Performance: Our non-sheathed elevator cable fully conforms to the requirement on heavy metal content specified by the EU RoHS. 2018-04-27T17:40:05+08:00 http://liftcontrolsystem.com/13-2-pvc-insulated-soft-cable(5-cores-or-below-5).html Insulation Resistance at 70°C: Complies withGB5023.5-2008 (idt IEC227-5: 1985) requirement Finished Product Voltage Withstand Test: 2.0KV (AC)/5min, no breakdown Product Certificate: 3C Certificate No.: 2003010105082952; CE Certificate No.: CE-LVD-0502 Lead Free Environmental Performance: The heavy metal element content in our PVC insulated soft wire fully complies with EU RoHS requirements 2018-04-27T17:40:05+08:00 http://liftcontrolsystem.com/13-3-pvc-insulated-soft-cable(6-cores-or-above-6).html Insulation Resistance of PVC Insulated Soft Elevator Cable at 70°C: Complies with CNCA-01C-002: 2007 requirement. Finished Product Voltage Withstand Test: 2.0KV (AC)/5min, no breakdown Product Certificate: 3C Certificate No.2004010105119795; CE Certificate No.: CE-LVD-0502 Lead Free Environmental Performance: Our product fully complies with the requirement on heavy metal content specified by the EU RoHS. 2018-04-27T17:40:05+08:00 http://liftcontrolsystem.com/13-4-flexible-elevator-cable-(24-cores-or-below-24).html Sheath Material and Color: High quality cold proof and lead-free elastic PVC material, gray (or black) Burning Test: Conforms to the requirements for single cable vertical burning test specified by IEC60332-1. DC Resistance of Conductor at 20°C: Complies with GB/T3956-1997 (IEC228） Insulation Resistance at 70°C: Complies with GB5023.6-2008 (IEC227-6) 2018-04-27T17:40:05+08:00 http://liftcontrolsystem.com/13-5-flexible-elevator-cable-(25-cores-or-above-25).html Color of Insulation Core: Various colors with printed numbers Sheath Material and Color: High quality cold proof and lead-free elastic PVC, gray (or black) Burning Test: Conforms to the requirements for single cable vertical burning test specified by IEC60332-1. DC Resistance of Conductor at 20°C: Complies with GB3956.-1997(IEC228:1978) and JB8734.3~4-1998 Insulation Resistance at 70°C: Complies with GB5023.3-2008 (idt IEC227-3:1985) Finished Product Voltage Withstand Test: 300/500V: 2.0KV(AC)/5min, no breakdown 2018-04-27T17:40:06+08:00 http://liftcontrolsystem.com/13-6-customized-elevator-cable.html 1. Make sure all the equipment inside the control panel cabinet is connected to earth properly. The short and thick earth wire should be connected to the suitable earth point or earth busbar. 2. The sheathed customized elevator cable usually uses flat conductor (such as metal mesh) which has low impedance under high frequency power transmission. 3. The power cable must be shielded in order to restrain the radiation and transmission of electromagnetic wave. At the same time, transfer impedance of the shield layer needs to be taken into consideration. 2018-04-27T17:40:06+08:00 http://liftcontrolsystem.com/13-7-oil-resistant-pvc-insulated-soft-wire.html Burning Test: Conforms to the requirements for single cable vertical burning test specified by IEC60332-1. DC Resistance of Conductor at 20°C: Complies with GB/T3956-1997 (IEC228) and JB8734.5-1998 Insulation Resistance at 70°C: Complies with GB5023.7-2008 (IEC227-7) and JB8734.5-1998 2018-04-27T17:40:06+08:00 http://liftcontrolsystem.com/13-8-oil-resistant-and-waterproof-cable-for-submersible-pump.html Insulation Material of Oil Resistant And Waterproof Cable: High quality lead free PVC soft insulation material Color of Insulation Core: Complies with GB5023.5-2008 ( IEC227-5) Sheath Material and Color: High quality lead free, water proof and cold resistant elastic PVC material, black color Burning Test: Conforms to the requirements for single cable vertical burning test specified by IEC60332-1. 2018-04-27T17:40:07+08:00 http://liftcontrolsystem.com/13-9-inverter-soft-cable.html Burning Test: Conforms to the requirements for single cable vertical burning test specified by IEC60332-1. DC Resistance of Conductor at 20°C: Complies with GB/T3956-1997 (IEC228) Insulation Resistance at 70°C: Complies with GB/T12706-2002 and enterprise standard Finished Product Voltage Withstand Test: 2.5KV (AC)/5min, no breakdown 2018-04-27T17:40:07+08:00 http://liftcontrolsystem.com/about-us.html STEP Electric is China control cabinet manufacturer, the full serial VVVF control cabinet has multiple elevator control modes like duplex, group control, remote monitoring, etc. Our products are widely utilized in equipment manufacturing and energy saving and renovation projects. 2018-04-27T17:39:54+08:00 http://liftcontrolsystem.com/history.html STEP Electric is China inverter manufacturer, elevator inverter is designed with 32-bit MPU for motor driving, high performance complex programmable logic device (CPLD), and advanced power module. The vector inverter is able to control various types of electric motors such as an induction or asynchronous motor, permanent magnetic synchronous traction motor, permanent magnetic synchronous motor, permanent magnetic synchronous servo motor, and more. 2018-04-27T17:39:56+08:00 http://liftcontrolsystem.com/testing-equipment.html STEP Electric is China inverter manufacturer, the vector inverter is able to control various types of electric motors such as an induction or asynchronous motor, permanent magnetic synchronous traction motor. Our testing equipment include the hardware, software and environmental testers, static tester, thermal shock tester, high temperature tester, low temperature tester and humidity tester, etc. 2018-04-27T17:39:56+08:00 http://liftcontrolsystem.com/flickr.html STEP Electric is China integrated drive manufacturer, the elevator integrated drive and controller is applicable for both synchronous motors and asynchronous motors. Incremental ABZ encoders can be utilized to achieve synchronous motor control. We have a conference hall, it offers 351 seats, and is fully equipped with conference facilities. 2018-04-27T17:39:56+08:00 http://liftcontrolsystem.com/certificates.html STEP Electric is China control cabinet manufacturer, the full serial VVVF control cabinet has multiple elevator control modes like duplex, group control, remote monitoring, etc. Our certificates include: UTC's Q+3 Level Supplier Certificate, ISO9001:2008, EN-81 Certificate, CSA Certificate, etc. 2018-04-27T17:39:55+08:00 http://liftcontrolsystem.com/service.html STEP Electric is China control cabinet manufacturer, our integrated full serial VVVF control cabinet is able to offer multiple elevator control modes, such as duplex control, group control, and more. We provide our frequency inverter and elevator controller with one year warranty from date we ship the goods. We can also offer OEM service. 2018-04-27T17:39:55+08:00 http://liftcontrolsystem.com/9-exhibition.html Here is our exhibition information such as in TIIE 2015, Russian Elevator Week 2015, Elevador Expo 2014 and IEE Expo 2014 . 2018-04-27T17:39:57+08:00 http://liftcontrolsystem.com/9-10-euro-lift-4th-international-lifts-exhibition 2018-04-27T17:40:20+08:00 http://liftcontrolsystem.com/9-9-interlift-2016.html 2018-04-27T17:40:19+08:00 http://liftcontrolsystem.com/9-1-interlift-2015.html 2018-04-27T17:40:16+08:00 http://liftcontrolsystem.com/exhibition-7.html TIIE is held annually, Shanghai STEP Electric Corporation participated in the exhibition from 15-19th October, 2015 and brought its industrial control products. 2018-04-27T17:40:17+08:00 http://liftcontrolsystem.com/exhibition.html STEP Electric Corporation participated together with Malaysia EITA company in this exhibition, and focused on launching the product Drive of Malaysian joint venture company SIGRINER. 2018-04-27T17:40:17+08:00 http://liftcontrolsystem.com/exhibition-5.html STEP Brazil company, attended the fair to improve the sales amount in Brazil and develop the market in South America and other countries. 2018-04-27T17:40:17+08:00 http://liftcontrolsystem.com/exhibition-1.html The IEE Expo is the largest fair for elevator, escalator, and the related product. STEP participated in the exhibition to further develop the market in India and enhance the brand awareness in the international market. 2018-04-27T17:40:17+08:00 http://liftcontrolsystem.com/exhibition-2.html Interlift is a professional fair for the first-class elevator and accessories manufacturers all over the world. 2018-04-27T17:40:18+08:00 http://liftcontrolsystem.com/exhibition-3.html Here is our exhibition information. 2018-04-27T17:40:18+08:00 http://liftcontrolsystem.com/exhibition-4.html STEP is a professional elevator control system supplier in China. We have participated in certain fairs for elevator industry and made great achievement. Our product is highly appraised by international customers. 2018-04-27T17:40:18+08:00 http://liftcontrolsystem.com/contact.html Shanghai YIXIN International Trade Co., Ltd. Add.: Room 3503, CITIC Plaza, No.859, North Sichuan Road, Shanghai, China. Postal Code: 200085 Tel.: +86-21-63931291 Fax: +86-21-63931223 2018-04-27T17:39:55+08:00 http://liftcontrolsystem.com/14-download.html STEP Electric is China inverter manufacturer. AS320 elevator inverter is designed with 32-bit MPU for motor driving, high performance complex programmable logic device (CPLD), and advanced power module. 2018-04-27T17:40:19+08:00 http://liftcontrolsystem.com/review.html 2018-04-27T17:40:19+08:00 http://liftcontrolsystem.com/1-2-fan-inverter.html The AS160 frequency inverter is classified into fan inverter and water pump inverter according to its application. Our water pump inverter is a newly developed AC drive for industrial and civil use water pumps. 2018-04-27T17:39:58+08:00 http://liftcontrolsystem.com/1-3-servo-drive.html AS210 servo drive refers to a controller for servo motor. It has the same function to a servo motor as that an AC drive to an AC motor. 2018-04-27T17:39:58+08:00 http://liftcontrolsystem.com/1-9-construction-elevator-inverter.html 1. Our frequency inverter is equipped with a built-in elevator timing sequence, a main contactor and an inverter control brake. 2. It supports UPS to achieve ARD function and is able to lift the drive to light load direction through automatic control. 3. Since new PWM dead zone compensation technology is applied in our elevator frequency inverter, damage to the motor is effectively reduced. 4. Multiple methods for frequency presetting are available to this construction elevator inverter to meet the needs of complex working conditions. 5. Automatic slip compensation can reduce the effects that load fluctuation has on the motor speed change so as to achieve accurate floor landing. 2018-04-27T17:39:59+08:00 http://liftcontrolsystem.com/1-11-high-voltage-inverter.html AS800 high voltage inverter is an energy saving and environmental friendly IGBT variable frequency inverter designed based on international advanced electrical, electronic and vector control technologies. 2018-04-27T17:40:00+08:00 http://liftcontrolsystem.com/1-12-elevator-door-inverter.html iAStar-S2 elevator door inverter, as its name indicates, is a frequency inverter especially for elevator door control and other types of automatic door control as well. It is designed based on vector control and V/F control technologies, and features compact and rational structure, small size, simple wire connection, and easy testing and commissioning, etc. Users can also choose an elevator door inverter with parameters compatible with their doors, thus avoiding testing and commissioning on site. While designing, we give the highest attention to varied application demands of end users, so our elevator door inverters have multiple functions, simple use and high operation safety standard. 2018-04-27T17:40:00+08:00