Elevator Cable

    2. Fixed Wiring and Non-sheathed Cable 300/300V: 1.5KV (AC)/5min, no breakdown; 300/500V: 2.0KV (AC)/5min, no breakdown; 450/750V: 2.5KV(AC)/5min,no breakdown 3C Certificate No.: 2003010105082949, 2004010105119784, 200401010519789 Lead Free Environmental Performance: Our non-sheathed elevator cable fully conforms to the requirement on heavy metal content specified by the EU RoHS.
      Inquiry Form
    2. PVC Insulated Soft Cable(5 Cores or below 5) Insulation Resistance at 70°C: Complies withGB5023.5-2008 (idt IEC227-5: 1985) requirement Finished Product Voltage Withstand Test: 2.0KV (AC)/5min, no breakdown Product Certificate: 3C Certificate No.: 2003010105082952; CE Certificate No.: CE-LVD-0502 Lead Free Environmental Performance: The heavy metal element content in our PVC insulated soft wire fully complies with EU RoHS requirements
      Inquiry Form
    2. PVC Insulated Soft Cable(6 Cores or above 6) Insulation Resistance of PVC Insulated Soft Elevator Cable at 70°C: Complies with CNCA-01C-002: 2007 requirement. Finished Product Voltage Withstand Test: 2.0KV (AC)/5min, no breakdown Product Certificate: 3C Certificate No.2004010105119795; CE Certificate No.: CE-LVD-0502 Lead Free Environmental Performance: Our product fully complies with the requirement on heavy metal content specified by the EU RoHS.
      Inquiry Form
    2. Flexible Elevator Cable (24 Cores or below 24) Sheath Material and Color: High quality cold proof and lead-free elastic PVC material, gray (or black) Burning Test: Conforms to the requirements for single cable vertical burning test specified by IEC60332-1. DC Resistance of Conductor at 20°C: Complies with GB/T3956-1997 (IEC228） Insulation Resistance at 70°C: Complies with GB5023.6-2008 (IEC227-6)
      Inquiry Form
    2. Flexible Elevator Cable (25 Cores or above 25) Color of Insulation Core: Various colors with printed numbers Sheath Material and Color: High quality cold proof and lead-free elastic PVC, gray (or black) Burning Test: Conforms to the requirements for single cable vertical burning test specified by IEC60332-1. DC Resistance of Conductor at 20°C: Complies with GB3956.-1997(IEC228:1978) and JB8734.3~4-1998 Insulation Resistance at 70°C: Complies with GB5023.3-2008 (idt IEC227-3:1985) Finished Product Voltage Withstand Test: 300/500V: 2.0KV(AC)/5min, no breakdown
      Inquiry Form
    2. Customized Elevator Cable 1. Make sure all the equipment inside the control panel cabinet is connected to earth properly. The short and thick earth wire should be connected to the suitable earth point or earth busbar. 2. The sheathed customized elevator cable usually uses flat conductor (such as metal mesh) which has low impedance under high frequency power transmission. 3. The power cable must be shielded in order to restrain the radiation and transmission of electromagnetic wave. At the same time, transfer impedance of the shield layer needs to be taken into consideration.
      Inquiry Form
    2. Oil Resistant PVC Insulated Soft Wire Burning Test: Conforms to the requirements for single cable vertical burning test specified by IEC60332-1. DC Resistance of Conductor at 20°C: Complies with GB/T3956-1997 (IEC228) and JB8734.5-1998 Insulation Resistance at 70°C: Complies with GB5023.7-2008 (IEC227-7) and JB8734.5-1998
      Inquiry Form
    2. Oil Resistant and Waterproof Cable for submersible pump Insulation Material of Oil Resistant And Waterproof Cable: High quality lead free PVC soft insulation material Color of Insulation Core: Complies with GB5023.5-2008 ( IEC227-5) Sheath Material and Color: High quality lead free, water proof and cold resistant elastic PVC material, black color Burning Test: Conforms to the requirements for single cable vertical burning test specified by IEC60332-1.
      Inquiry Form
    2. Inverter Soft Cable Burning Test: Conforms to the requirements for single cable vertical burning test specified by IEC60332-1. DC Resistance of Conductor at 20°C: Complies with GB/T3956-1997 (IEC228) Insulation Resistance at 70°C: Complies with GB/T12706-2002 and enterprise standard Finished Product Voltage Withstand Test: 2.5KV (AC)/5min, no breakdown
      Inquiry Form
Contact Us

SHANGHAI YIXIN INTERNATIONAL TRADE CO., LTD
Add.: No.599, Meiyu Road, Jiading District, Shanghai, 201802, China.
Fax: +86-21-31010649
Tel.: +86-21-31010610
E-mail: overseas@stepelectric.com